Ball 5.8mm with hex cavity, for connection to molded composite ball joints. Set of four. 

Set of composite shims and nuts to space the shocks further away from the shocktowers. Makes the car more stable mainly in chicanes, but reduces steering into corners. 

New nylon piston set to work with new keyed piston rods (308152 and 308252).
The complete keyed shock piston conversion set offers a professional solution for the adjustable XRAY & Serpent shocks.
 

Set of four alu. spring-tension adjusting nuts and four O-rings to be inserted in them. O-rings prevent adjusting nuts from coming loose. 

Silicon-rubber compensation membranes for shock absorbers. Set of four.  

Foam inserts for XRAY shocks, go between shock upper mount and rubber membrane. Set of 4 pieces. 

Set of parts to make two (2) complete XRAY shock absorbers (front or rear) for the XRAY T2’008, T2'009, T3 that feature shorter, race-proven, externally-adjustable racing shocks. The new shorter shock body and shock shaft were designed for improved suspension lift and lower CG. 

Molded composite ball joints for ends of XRAY T2, T3 shock shafts. Set of four. 

T4 shock absorber composite spare parts.  

Machined alu upper shock cap for XRAY Shock Absorber-Set 4-Step. Set of 2.

The upper aluminum cap features a small vent hole that makes shock assembly very predictable and easy, since excess shock oil will escape through this vent hole.  

Hardened, high-strength short shock shafts for use with #308302 XRAY short shock absorbers. Polished for super-smooth operation. Set of 2.  

For even more fine tuning of suspension dampening, XRAY offers an additional ultra-fine tuning springs in addition to the basic XRAY springs. The ultra-fine tuning springs have different damping and compression characteristics that fall between the range of the basic springs. All 4 springs within the set have the same length and damping characteristics. 

Set of four coil-springs for XRAY shock absorbers. All 4 springs within the set have the same length and damping characteristics.

Colour: White
Tension: Soft

NOT interchangeable with yellow springs for Serpent shocks - 308095 Spring-set D=1.5 White (2+2)
 

Flat washer, 3.2mm ID. Set of 10 pieces. 

1.9mm dia. E-clip. Set of 10 pieces. 

2.3mm dia. E-clip. Set of 10 pieces. 

Rubber O-ring fits over 5mm shaft. 1mm thick. Set of 10 pieces. 

Rubber O-ring fits over 12mm shaft. 1.6mm thick. Set of 10 pieces. 

Silicone O-ring fits over 3mm shaft. 1.6mm thick. Set of 10 pieces.